Have a question? Call us: 
+1 (801) 290-7500
Have a question? Call us: 
+1 (801) 290-7500
Header Artwork

Find a test

Environmental Monitoring Tests – Air & Water

Environmental Monitoring involves the incubation and counting of microbial environmental monitors, such as surface samplers, passive air samplers, and active air samplers. Environmental control is a requirement of all Good Manufacturing Practices. Nelson Labs can perform microbial identification work immediately on any growth observed. For setting up an environmental monitoring plan for cleanrooms or other aseptic environments, refer to USP <1116>.

For information on water system environmental monitoring, please see Water System Validations.

Applicable Standards

  • PDA TR13
  • USP 1116

Testing Locations

Study Outline

For Environmental Analysis, it is the responsibility of the sponsor to sample its facility according to its procedures. Once the samples arrive at our lab, they are incubated and enumerated. If the samples require any manipulation before incubation, please contact the lab prior to sending.

The total count may be expressed in several different ways depending on the type of sample and sponsor preference. Examples include: colony-forming units (CFU)/plate, CFU/filter, CFU/m3, or CFU/cm2. At the sponsor’s request, samples may be retained for identification or gram stains. Unless otherwise specified, tested samples will be discarded seven days after the study has mailed.

If you have additional questions about Environmental Air Monitoring test services, or would like to consult with the experts at Nelson Labs, just send us a request or call us at +1 (801) 290-7500.